Each hydraulic vibration gold recovery machine is a complete, portable gold picker.
The hydraulic vibration screening part can screen 70cm stones for the feed.
A hydraulic transmission system can reduce fuel consumption and reduce mechanical loss.

Description

Name: hydraulic vibrating plant, hydraulic vibration gold washing plant
Specification and model: 25, 50, 80
Feeding particle size: ≤ 300-350mm
Production capacity: 5-20tph / 30-50tph / 60-100tph
Applicable site: suitable for rivers without roads, mountains, canyons and sand gold mining areas without power supplies.

3 Advantages
1. Disassembling the entire machine, transporting it by humans, and disassembling and assembling it quickly is the design.
2. Low failure rate, stable operation, and simple operation.
3. The two-stage gold chute design and the new type of gold absorption blanket can recover coarse-grained and fine-grained monomer gold simultaneously.

Small vibrating gold concentrators are a portable and complete gold concentrator that is used for placer gold mining. The machine includes a water pump, a sluice, a diesel engine, a hopper, and a vibrating screen. In Africa, the machine is widely used to recover free gold from placer / alluvial deposits.

Working Principle:

70cm stones can be fed into the screening part and screened. The screening process begins when the raw materials are poured onto the screen strip. After the crushed stones are washed with high-pressure water, the stones are discharged from the rear. Those with a smaller particle size are separated by the second sieve layer. Separation and enrichment of gold occurs after secondary screening, when the sand water mixture is directed into three independent adjustable chutes. The chute can adjust the front and rear angles and balance the left and right through the hanger to adapt to different terrain and working conditions, ensuring good recovery rates. The gold separator is easy to clean. The lower gold separator pad can be easily removed and flushed.