Working Principle:

A V-belt drives the crusher rotor. High-speed circular motion is produced by the rotor driving the hammerhead. When the material enters the crushing chamber, it is hit by the high-speed rotating hammer head and broken. The large blocks of special materials fall onto the middle support bar. When they are hit by the hammerhead for many times, they are crushed into small pieces and fall into the lower part. Following crushing, the materials with particle size greater than the requirements are crushed again along the tangent direction of the hammerhead with the new materials, so that the coarse, medium and fine crushing can be completed in one step. Finally, the qualified materials are discharged through the sieve plate hole.

Features:

1. Gas shielded welding and vibration failure processes are used to weld the body, which makes the structure stronger.
2. The transmission parts are processed by CNC centers and quenched and tempered, so they have a higher degree of toughness.
3. After surfacing, the hammer disc’s surface is more wear-resistant due to its high-toughness material.
4. High-chromium alloy is used in the hammer head because of its superior wear resistance and tensile strength.
5. The sieve plate and guard plate are made of alloys that are anti-wear and impact-resistant, so they are more resistant to wear.
6. Improved appearance design and improved internal quality result in superior performance.